We are making a batch of these kits (details below), place your deposit and wait till we email you with the link for final remaining balance.

KIT PRICE- $3600

BATCH FABRICATION DATE: 23RD OF JUNE, 2025
SHIPPING DATE: 7TH OF JULY - 21ST OF JULY
(Allow a week or two in shipping depending on your location.)
THE BUY NOW PRICE OF $600 IS THE DEPOSIT ONLY.

INTERNATIONAL CUSTOMERS: EMAIL YOUR DETAILS TO- SALES@SHOWTIMECUSTOMS.COM.AU TO RECEIVE AN INVOICE FOR DEPOSIT! 

$600 Deposit is NON-REFUNDABLE
Full payment to be made in the week PRIOR to the 23RD OF JUNE, you will receive an email 1 week prior with our Online-Store payment link.

Once deposit has been paid, the remaining balance owing will be-
$3000Aud
Shipping is included in the total price, if you are from a remote area we may need to charge an additional amount for freight.




If you're looking to put your Commodore on the Podium, this is the kit for you!🏆

No other kit previously available comes close to the capabilities of what our latest COMP Series Kit can achieve 😈

This Listing is for-

💎Fabricated Steering Knuckles
💎1 Piece Style Lower Control Arms (SOLID, No pocket cutouts! See last 3 pics)
💎LCA Caster Mounts (These mount to the LCA)
💎Front Subframe Caster Mounts
💎Upper Camber Plates
💎Upper Pillowball Coilover Camber Tops
💎65mm Spring Seat Plates
💎Tie Rods
💎Heim Tie Rod Ends
💎Double Heim Adjustable Sway Bar Links
💎Steering Rack Relocation Plate (Requires Fabrication to Subframe)
💎Steering Column Extension (Requires Fabrication to Lower Column)
💎And of course all the necessary Hardware!

Please Note- Unfortunately these Kits are not interchangeable with previous LCA Designs (Such as the V1 Tubular & V2 Fabricated Control Arms) due to a difference in Geometry.
Attempting to retro fit the COMP Series knuckle onto the older style arms will lead to a very poor handling and possibly unsafe setup.
We do offer a Payment Plan, please enquire via email if interested!
Sales@showtimecustoms.com.au



Running a Trailing Caster arrangement on the Steering Knuckle, this kit will be capable of much greater speeds at angle due to the greatly increased Tire contact patch
The function of the Trailing Caster also greatly reduces 'Jacking' whilst keeping a nice feedback through the steering wheel.

A few other great features with the new Knuckle design are 60mm Improved Roll Centre over a standard knuckle as well as an adjustable Ackerman Value which is capable of 0 Ackermann at 70°+ Degree's of Angle!

This Kit has been designed to upgrade to the later model Ve Commodore (Pontiac G8) Hubs & Brakes, which will allow you to run any brake in the VE Range (Typically the V6 brakes or the SS brakes are a great improvement over the Vt-Vz Brakes and still keep a great pedal feel)

The Lower Control Arm runs a 1 Piece style design with a removeable front caster mount section, along with a Sway Bar Link tab and the necessary Sway Bar Links to convert from the factory Links that run up to the Strut.

Supplied also are the Tie Rods and Heim Style Tie Rod Ends (As apposed to a factory Ball Joint Style End)

Requirements-

~You will need to modify the Subframe and Steering Column to allow the Steering Rack to move forward Approx. 50mm, The necessary components and Instructions are included. 
Please make sure your style of header will have clearance (You can heat the exhaust tube and dent it in to gain a little clearance)

~You will need to run Coilovers in the front, Just your typical Vt-Vz (GTO) Coilover is fine, we supply the appropriate components to convert from the factory Rubber Upper mount to a PillowBall Style Mount.
You will however need to drill out the spot welds on the factory upper mount underneath the strut tower and drill an additional 3 Holes. (drill template included)

~As mentioned, You will need to convert to a VE Commodore/G8 Pontiac front Brake and Hub. 

~Depending on Brake size you will be limited to a Minimum of a 16" wheel, However to clear the Tie Rods and Chassis Rail at full lock a larger offset wheel will be required.



PLEASE NOTE-  
LCA is a solid 1 piece design with no pockets cut into it as pictured!
We do not know if or when we will release this product again so in our opinion the additional weight and not as aesthetically pleasing design will be well worth the sacrifice for gained strength! 

Replacement Tie Rods will always be available HERE

Images shown may differ from actual product appearance.


For International Orders, Please Email us at Sales@Showtimecustoms.com.au


Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!