VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM
VB-VS PRO RADIAL BODY MOUNT SYSTEM

VB-VS PRO RADIAL BODY MOUNT SYSTEM

Regular price$795.00
/
Shipping calculated at checkout.

  • Sticker Kit Included

If you're wanting the ultimate in Strength and Adjustability from your VB-VS 4 Link then our all new Pro Radial style Body Mount system has plenty to offer!

This Listing is for-

1 x Pro Radial Style Body Mount System (2pcs in total)

No hardware or additional components are included.
  

A few key features to point out are-

This Adjustable Body Mount system is designed to replace the factory upper & lower Trailing Arm Body Mounts.

With plenty of adjustment to suit your typical tough street car through to full No-Prep style 4link settings with a super short IC and big Anti-Squat value's.

Side holes in plates are 1.250" DIA, allowing you to tie a tailshaft loop in or some additional barwork.
The front side of the lower mounts allow ease of fitting chassis connectors to.

Provision for factory Sway Bar Links.

Please note-

This setup runs the same upper trailing arm spacing width as factory (723mm) as well as the same 50mm bushing width as factory, along with a 10mm bolt hole which can be comfortably opened up to 12mm or 1/2". 
The lower trailing arm spacing of 830mm centre to centre has a bushing width of 1.750" (45mm) and a bolt hole dia of 1/2". 

(provide this lower 4 link spacing measurement to your diff builder when having your diff built, alternatively if your bracketry is already fitted to the diff wider than this 830mm measurement then running the lower 4 link bars inward toward the mount (somewhat triangulated) will be fine providing you are running a Heim joint on each end of your lower 4 link bar.)

Our 1st-2nd Gen Pro RADIAL diff is standard with this 830mm lower spacing however when purchasing our Pro STREET 9" kit you will need to leave a note at checkout stating that you require the 830mm lower spacing to suit the Pro Radial Body Mount system.


Lastly, this system has been Designed in CAD, CNC Laser Cut, Machine Chamfered, prepped for fabrication and Tig welded together in our specially designed jig to ensure you receive the best product we can deliver!

 


Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

 Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.


Recently viewed