TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS
TRACK LOCATOR- WELDED TO SUIT YOUR SPECS

TRACK LOCATOR- WELDED TO SUIT YOUR SPECS

Regular price$975.00
/
Shipping calculated at checkout.

  • Sticker Kit Included

This is our extremely durable 1" Track Locator, welded together to suit your specs, utilising a 1" solid 4130 Chromoly Track Slider bar, used in A arm style Track Locator bar on your 4 Link setup.

This listing is for-

1 x Track locator- fabricated to your specified length x width, utilising the below components.

1.250" x .083" 4130 Tube
1.00"x.065" 4130 Tube
2 x 1.25" 5/8" Tube adapters, Jam nuts & 5/8"-1/2" Heim Joints
1 x 1.375" 4130 Cr-Mo Outer Slider Tube
2 x Nylon Slider Bushings
2 x RR-125 Spiral Lock
1 x 1" Slider Bar Kit
Inc Hardware

Please also see the listing's on our store for any necessary Track Locator mounting Tabs and brackets.

A Track Locator prevents lateral movement in the rear end throughout the suspension travel (which is typical of Panhard bar type setups).

This Track Locator comes fabricated, ready to install in your vehicle


The outer Slider tube is 1.375"OD 4130 Chromoly and houses two Nylon Bushings which are held captive with Spiral locks.
The Nylon bushing's have great abrasion resistance and self-lubricating properties, only requiring a light coating of PTFE or silicone spray during maintenance to keep it clean and for additional lubrication.

The Track Slider is fitted with a 5/8" x 1/2" RH Heim, allowing you to mount the slider to the Diff or Chassis with a 1/2" Grade 8 Bolt (included).

Nylon bushings & Spiral locks are also available separately as spares.
Again, please see the listings on our store for Track Locator Tabs and mounting brackets🤘

 


Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.


Recently viewed