Our new generation of VT-VZ IRS Kits are now available!
These kits allow you to shorten the rear wheel track on your Commodore as well as eliminating 90% of the flex that the factory control arms and bushings suffer from under hard launches and cornering!
This Listing is for-
1 x Pair - SCF Shortened IRS Trailing Arms
1 x Pair - SCF Custom Length Driveshafts (OEM Power Rating. Higher HP rated Driveshafts available for additional cost)
These arm's have been designed to shorten the rear wheel track 100mm/4" per side!
This Kit will ONLY work with split mini tubs (Factory Wheel Tub moved across to the rail, The area of the wheel tub needs to move across all the way to the chassis rail to clear the shock) and providing you have the correct width/offset wheels (See below)
Not only do we shorten the track but we also run a Chromoly tubular outer arm and Chromoly Teflon lined heim joint & threaded adjuster which eliminates all of the flex that the outer bushes suffer from under hard launches in drag racing and heavy cornering in drift/race applications, and to further aid in ease of alignment we have fitted SuperPro Adjustable bushes to the inner pickup points.
These Kits also do away with the poorly designed/weak factory rear Toe rods.
By shortening the rear wheel track a greater wheel offset is required, it is advised that you have the kit fitted before measuring and ordering your new wheels!
Below measurements are NOT the exact measurement's required but only an estimated largest wheel size/offset of what MAY fit.
Split Tubbed-
15 x 10" with 4.5" Backspace- 275/60 Radial
20" x 10" with 4" Backspace (-38 Offset)
22" x 10" with 4.5" Backspace (-25 Offset)
(Both the Silver Monaro and the Red Clubsport are running 20x10" 4" Backspace wheels for reference)
Please read BEFORE purchasing!
These are not a straight bolt and go type setup, it is highly suggested to have your fabricator minitub the vehicle and fit the IRS along with modify anything required, see below-
Trailing arm's are modified factory item's that are in good working order locally sourced from wreckers and once completed are finished in a Satin Black enamel, this means that they may have small blemishes and inconsistencies.
These arms will raise the height of the car approximately 15-30mm, a lower spring will be required to achieve your desired ride height.
SEDAN- When running the 100mm Kit on Split Mini tubs the fixing's for the rear Shock's can be put under pressure from moving the arm so far in, thus causing premature wear on the shock bushes.
UTE/WAGON- Will require a considerably shorter rear shock.
Brake line tabs on the chassis rail may have to be moved if it appears that they will make contact with the arm under full compression.
Exhaust system or aftermarket fuel systems may have to be modified.
Shipping is Flat Rate to all major Cities & Suburbs, Remote Area's may incur an additional Surcharge.
(The additional surcharge will not be charged during checkout, once Order is packaged and booked you will receive an Invoice for the additional)
PLEASE NOTE-
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 6 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.
