PRO RADIAL COMMODORE 9" HOUSING & 4 LINK PACKAGE- 1st/2nd GEN VB-VS

Total Price is calculated once you select 'Add To Cart'  
Please read the entire listing before making your purchase, this is a custom built product per order that we do not offer return's on.

If you're wanting to go fast in your 1st-2nd Gen Commodore this is the setup for you.
Our Pro Street kit is a great all rounder package no doubt about it, however this Pro Radial kit has been designed and built with one goal in mind, to go FAST and look good doing it!😈

This Listing is for-
1 x SCF Pro Radial 9" Diff Housing- To Suit VB-VS Commodore LIVE AXLE (Sedan, Ute, Wagon)
1 x SCF Anti-Roll Bar Kit to suit Housing
1 x PAIR SCF Billet Coilover Diff Mounts
Including all appropriate Hardware.

Scroll down for Shipping information.

The Pro Radial Bracketry allows for a huge amount of adjustment in setting up your IC and Anti-Squat% value's as well as vehicle ride height/shock travel height. 
Further complimented by our Pro Radial Body System.

This kit runs our 1.750" Billet Anti-Roll Bar kit on the Housing as well as our Billet Coilover Mounts😎

These Housings are built with a CENTRE Pinion offset and a Centre to Centre Bracketry Width of-
Upper 4 Link- 723mm(28.5")
Lower 4 Link- 830mm(32.75")
Coilover- 642mm(25.30")

We can option this kit to come without Axles, with 35 Spline Billet Axles or setup on a Floater assembly (please email for pricing on Floater setup) 
Pricing reflects housing built to your required length and fitted with Ford Big New housing ends.

The Anti-Roll Bar Kit is included and fabricated to suit the housing.
You will need to cut the Links to suit your desired length.

The Housing also includes a Mount for either a Front or Rear mounted Track Locator, or the option for a Panhard Bar Mount. with the options being-
Rear- (most common) Mounted at the rear of the Housing, roughly 3" below centre height.
Front- Mounted on the bottom of the housing, allowing a Track Locator to be mounted off the 4 link bracketry in front of the Housing.



Housing Type & Options- 

Housing is our Sheetmetal style 3" Tubes.
We anticipate we'll have our Billet face plate 3.5" Housing available as an option by 28/1/25

The Housing comes cut to your desired length and fitted with Ford Big New Housing End Flanges.
Housing's are fitted with Fill Plug, Drain Plug and Diff Centre Section Studs
Note-
Diff length is measured from Wheel mounting face to Wheel mounting face!
From this measurement we then deduct 5mm per side to allow for Rotor thickness. 
Please allow up to 10mm+/- on the finished diff length for variances in manufacturing.
Please ensure you have the correct measurement, no refunds will be given on incorrect diff length.



Axles-

Please select if you require us to also supply a set of 35 Spline Billet Axles. 
Billet Axles are machined to suit and fitted with either 1/2" x 3" or 5/8" (STR-A1037) Studs, Bearings & Seals. 
Note- 
Axles have a 69.5mm Centre Bore
35Spl Axles have a 2.5" Brake Offset to suit the off the shelf Wilwood Brake Kits.
35Spl Axles do NOT come with Retaining Plates (These are included in Wilwood Brake Kits when you purchase them)



ADDITIONAL OPTIONS-

This listing is for our Pro Radial Housing, ARB Kit (welded to suit Housing) & our Billet Coilover Mounts, however, to complete this setup you will require a few other components of which you can either source yourself or have us supply!
See below-



Track Locator-
Available in either our DIY style kit- HERE
Or as a complete welded unit- HERE
Note- The Housing comes fitted with a Track Locator mount, please select whether you require a FRONT or REAR Track Locator Mount.

If choosing the WELDED Track Locator, feel free to select your own dimensions to suit your build.  
To give you an idea, typically our REAR mount Track locator's are around L500mm X W500mm.
Please also check out our range of Universal Mounting Tabs for mounting your Track Locator to the Body.



4 Link Bar Set-
Our 4 Link Bar Set to suit- HERE
This Set comes with the appropriate hardware to suit the Bracketry spacing on Housing of 45mm(1.750") and will adapt to our Pro Radial Body Mount System, our Lower Trailing Arm 4 Link Brackets or any of your own fabricated body mount's running a 1/2" Bolt hole's



Coilovers-

We can supply you with a pair of Viking double adjustable Coilover's
These are a great bang for buck Coilover, offering plenty of adjustment in valving.
Email for pricing to suit, bare in mind wait times can vary due to international shipping.

If you do wish to source your own Coilovers, you will require something with around a 7" stroke such as an Afco-3870BG.



Diff Centre-

RTS are at the top of the game within the affordable Diff Centre & components market!
We can happily supply a centre built to suit your needs by selecting your required specs.
For additional information on the RTS Diff Centres, please see HERE



Fabrication/Install-

This Setup does not require minitubs, but it sure is recommended😁
This Setup requires new mounting points on the body for the 4Link bars, Track Locator, Coilover & ARB Mounting points.


It will require the Tailshaft to be modified to suit or a completely new Tailshaft built to suit the 9" Diff centre.

Please also see our DIY Tub Kits available to purchase as well🙂



Brake options-

The 35Spline axle option runs a Ford Big New Housing end, this will allow the use of a Wilwood Brake kit inc internal handbrake assembly or alternatively if you wish to run the factory style IRS Brake's (or an IRS big brake kit eg. Harrop, AP racing etc) Lowe Fabrications sell a Brake adapter kit to mate them to the Ford Big New Housing Ends.




Shipping-
Shipping ON THIS LISTING is not charged for in checkout, you will however be charged shipping on any other Products you add to your cart during Checkout.
Once your Order is completed and ready to be shipped we will calculate the total shipping price, deduct the amount already paid on your initial order and then Invoice for the remaining shipping amount once your order is packaged and shipping has been quoted. 
You will receive an email with the attached invoice, once paid please reply with a payment remittance to ensure there is no delay in shipping.
Your order under no circumstances will NOT be shipped until complete payment for the total of the order & shipping has been received.
Shipping will need to be to a commercial/business address, otherwise a tailgate loader truck will have to be booked (at an additional cost). 
Please see below for rough estimates of shipping prices, these prices are only a rough estimate and can vary for rural cities/towns. Please email us with your postcode if you would like a closer estimate!

Melbourne- $140
Canberra- $155
Sydney- $155
Adelaide- $155
Perth- $260
Brisbane- $185
Darwin- $280

Pick up-
Pick up is available from our Workshop, STRICTLY by appointment only!
Once your order is complete, you will receive an email to arrange a time/date for collection. 
Without prior arrangements you will NOT be able to collect your order, unfortunately we don't have a premises that is suitable to be open to the public.
Our workshop address is:
2 Depot road, Heathcote Victoria 




Please note-

Does not fit Crewman/One Tonner.

All orders are manufactured per order, please allow up to 8 weeks for the order to be fulfilled before shipping. 
Stock qty's and wait times on products such as Axle's & Coilover's etc can vary and are out of our control.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel that the product itself , the wait times or shipping terms will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.


This kit does not include any form of engineering or imply that it is built to a specific standard.
(Basically, you will need to have your preferred engineer assess and sign off on the complete vehicle including the rear end modifications. We always suggest chatting with an engineer prior to modifying your vehicle if you wish to keep the car 'street legal')

Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!