Built to help you fit more tyre under the rear of your VB-VL Sedan, these Radius Edge Wheel Tubs are a clean, practical solution for builds needing extra clearance without unnecessary guesswork.
Designed for notched rail applications, this kit suits fabricators and builders wanting an assembled tub package that is easy to position, mark out, and trim to suit their chassis rail profile. It is a solid option for serious street, show, and custom builds where rear wheel clearance matters.
This listing includes:
1 x pair of Wheel Tubs to suit notched rail 240mm
1 x Spare Wheel Delete Panel
1 x Drivers Long Tub Infill Panel
2 x Boot Gussets
1 x Tailshaft Hump Panel
2 x Chassis Rail Notch Plates
Overview
These wheel tubs are supplied assembled to save time during fit-up and fabrication. The side panel is formed as a complete half moon, ready for you to trace and cut to suit your chassis rail profile.
The outer flange is supplied un-drilled, giving you flexibility during installation. You can drill it to suit your preferred fastening method, or stitch weld the lip of the flange to the body of the vehicle depending on the requirements of your build.
We offer two pre-determined options to suit 1st Gen Commodore applications, both based on an 800mm diameter radius. The Standard Rail option (this will be minitubbed TO the Rail, not notching into the Rail) This listing is for the Notched Rail 240mm version.
If we're out of stock on the complete kit, you can also purchase just the wheel tubs by themselves as a pair- HERE
Key Details
Designed to make it easier to fit a larger rear wheel and tyre under the vehicle
Tub width: 240mm from the Flange to the Tub Side
Suits notched rail applications
Shipped assembled
Side panel is a complete half moon
Ready to trace and cut to suit your chassis rail profile
Outer flange supplied un-drilled, Can be drilled to suit your requirements
Flange lip can also be stitch welded to the body of the vehicle
This listing is for the Notched Rail 240mm version.
These wheel tubs are shipped assembled. (Spot welded together, other pieces are loose)
The side panel is a complete half moon, ready for you to trace and cut to suit your chassis rail profile.
The outer flange comes un-drilled.
You can drill to suit your requirements or stitch weld the lip of the flange to the body of the vehicle.
Helpful tip: sit the Wheel Tub a further 5–10mm inward on top of the chassis rail. For the guys trying to squeeze every inch of tyre under the car, this will allow the diff to articulate a little without rubbing the inside of the tub.
Please allow up to 7.5mm +/- on the finished tub width for variances in manufacturing.
All products supplied by Showtime Customs & Fabrication must be installed by a qualified professional. Regular inspection and maintenance is the responsibility of the end user.
Unless otherwise stated, suspension, steering, brake and related performance components are intended for off-road, motorsport, or show use only. Showtime Customs & Fabrication accepts no liability for damage, injury, loss or death resulting from incorrect installation, misuse, lack of maintenance, or failure of associated components.
