Showtime Customs & Fabrication


Regular price $289.00
Unit price  per 

Drift Knuckles are a standard Commodore knuckle that has been modified to pull more lock and a better Ackerman angle for drifting. 

This listing is for - 
1 x Pair of Modified Drift Knuckles VR-VS

These are sold as Changeover only, you will need to send in your own knuckles to be modified!

Ship to: 
Showtime Customs & Fabrication
2 Depot Road, Heathcote 3523 VIC
0432 020 733

Running Drift Knuckles will allow you to hold a far greater angle through your drift, increase your entry speeds into corners and decreases the chance of spinning out.

These are a straight bolt in with no other modifications essential, just swap them with your standard knuckles, get alignment and go drifting.  
To compliment this setup we recommend a pair of Shortened Caster Rods to increase caster angle.
As well as our LCA bolt on Sway Link Set which mounts the sway links to the Lower Control Arm,  this prevents any binding you may receive from the standard sway links hitting on the struts at full lock. 
Both of these products mentioned can also be purchased through our online store! 


Please Note - 
For those running a typical Holden 8" wide alloy wheel you may need to run a 10mm slip on wheel spacer as the inside of the rim can foul on the Tie Rod under full lock. 

Brake Rotor may rub on LCA at full lock.




Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.