DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS
DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS
DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS
DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS
DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS

Showtime Customs & Fabrication

DIY 1MM FAB MINITUB KITS- VN-VS LIVE AXLE SEDAN- EQUAL LENGTH TUBS

Regular price $545.00
Unit price  per 

These allow for a wider wheel tub, Moving the side of the wheel tub across to the Chassis Rails however do not require any cutting into actual the Chassis Rails. Being a fabricated tub there is no provision for a Shock Absorber, Typically you would run an underfloor Shock/Coilover setup as a replacement.

Included in the kit-
2 x Tub Tops
2 x Tub Sides
1 x Tub Side Infill
1 x Lower Infill
1 x Spare Wheel Delete Panel (The original Spare Wheel Well can be retained if need be)
1 x Spare Wheel Infill Panel
2 x Shock Recess Infill's

This Tub Kit is to suit Equal length Tubs, With this Tub Kit you will NOT be able to retain the original Factory Fuel tank.
If you would like The Long Drivers Side Wheel Tub Kit please see listing-

Tubs are constructed from 1mm mild steel and are flat packed for transport.
All that is needed to assemble is a hammer to knock the tubs together and fold the lip over. (but a dolly and a couple extra hands will be great help).

This is a DIY kit meaning the Minitubs are supplied but will require you to mark and cut out the original wheel tubs and weld these in place. For a novice allow roughly 24-28 hours labour start to finish.


Please note-
Tub Kits should only be installed by experienced Fabricators.
(NO Instructions are included)





Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!



Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.