VN-VS SEDAN/WAGON TAILSHAFT HUMP- 2 PIECE SHAFT STYLE
- Sticker Kit Included
These Panels are great for raising the rear hump section above the Diff Yoke of your VN-VS Sedan or Wagon.
This listing is for-
1 x 2nd Gen VN-VS Sedan/Wagon Tailshaft Hump Panel
Typically fitted when installing minitubs to the vehicle, whether you're running a 9" or the factory diff it is common for the diff yoke to hit the factory floor pan when lowering the car.
This panel will allow more than enough clearance when running a 2 piece tailshaft (whether it be on a factory diff or a 9" with a 1350 uni)
See here for the Rear Fire Wall Panels-
VN-VS SEDAN REAR FIREWALL PANEL – Showtime Customs & Fabrication (showtimecustomsfabrication.com)
It is suggested that the panels be welded in and seam sealed.
Panels are made from 1mm mild steel and are flat packed for transport.
You can shape the panel over a piece of tube to mimic the factory body shape.
Please note-
A longer raised hump is required when running a Single piece tailshaft.
The factory rear seat base (foam) may need to be modified to clear the raised hump (the seat base would visually remain the same).
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.
This listing is for-
1 x 2nd Gen VN-VS Sedan/Wagon Tailshaft Hump Panel
Typically fitted when installing minitubs to the vehicle, whether you're running a 9" or the factory diff it is common for the diff yoke to hit the factory floor pan when lowering the car.
This panel will allow more than enough clearance when running a 2 piece tailshaft (whether it be on a factory diff or a 9" with a 1350 uni)
See here for the Rear Fire Wall Panels-
VN-VS SEDAN REAR FIREWALL PANEL – Showtime Customs & Fabrication (showtimecustomsfabrication.com)
It is suggested that the panels be welded in and seam sealed.
Panels are made from 1mm mild steel and are flat packed for transport.
You can shape the panel over a piece of tube to mimic the factory body shape.
Please note-
A longer raised hump is required when running a Single piece tailshaft.
The factory rear seat base (foam) may need to be modified to clear the raised hump (the seat base would visually remain the same).
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.