DRIFT KNUCKLES VR-VS
- Sticker Kit Included
Knuckles are to be received by the 7th of April, 2025.
Orders will begin to be shipped on the 21st of April.
Drift Knuckles are a standard Commodore knuckle that has been modified to pull more lock and a better Ackerman angle for drifting.
This listing is for -
1 x Pair of Modified Drift Knuckles VR-VS
These are sold as Changeover only, you will need to send in your own knuckles to be modified!
Send bare knuckles only please, if sent with hubs they will be removed and thrown in the scrap bin.
Please clearly label your package with your Name &/or Order number (If you are getting knuckles sent direct from a wreckers or otherwise please make sure the Invoice or paperwork has your name on it, we can't be responsible for who's knuckles are who's guys)
Ship to:
Showtime Customs & Fabrication
2 Depot Road, Heathcote 3523 VIC
03 4432 7917
Online@showtimecustoms.com.au
Running Drift Knuckles will allow you to hold a far greater angle through your drift, increase your entry speeds into corners and decreases the chance of spinning out.
These are a straight bolt in with no other modifications essential, just swap them with your standard knuckles, get alignment and go drifting.
Please Note -
For those running a typical Holden 8" wide alloy wheel you may need to run a 10mm slip on wheel spacer as the inside of the rim can foul on the Tie Rod under full lock.
Brake Rotor may rub on LCA at full lock.
If so, grind the LCA down a little till it clears.
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.