Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
DIY 2.5MM SKID TUB KIT- to suit VT-VZ Ute/Wagon/Sedan inc Monaro/GTO.
Sticker Kit Included
These allow for a 60mm wider wheel tub, but do not require any cutting into the chassis rails. Being a fabricated tub there is no provision for a standard Sedan shock, you can either run a Ute style shock/brackets, a coilover setup or a live axle.
Included in the kit- 2 x tub tops 2 x tub sides 1 x infill side panel 1 x bottom infill panel 2 x rear skid plate (Sedan will need to be cut to suit) 2 x shock recess plates (Sedan only)
PLEASE NOTE: Wide Tub kit's are STRICTLY only for cars that are converting to a Solid Axle diff setup or Solid Axle style Coilovers to the underside of the Chassis Rails. They will NOT fit a car that is retaining an IRS, whether it be a factory IRS or shortened.
The Wide tubs will tub the car hard up to the chassis rail (at the front side of the chassis, it will notch into the rail 15mm at the rear) keep in mind you can then cut these tubs down to suit your required width if need be. The Normal tubs are perfect for any Factory or Shortened IRS Setup, You will achieve a 60mm wider wheel tub which will leave more than enough room for a 275/60 Radial or 20/22" x 11" Rim.
Tubs are constructed from 2.5mm mild steel, tub tops are pre rolled yet require welding to assemble.
This is a DIY kit meaning the minitubs are supplied but will require you to mark and cut out the original wheel tubs and weld these in place. For a novice allow roughly 24-28 hours labour start to finish.
Please note- Tubs will not work with a standard Sedan fuel tank.
A custom width can be made up if need be. Tub Kits should only be installed by qualified fabricators. No instructions are supplied.
Picture of red vehicle shows our 1mm fabricated tub for the purpose of showing how it will fit. The 2.5mm tub kit does not include bead rolling.
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping. If you have any queries on turn around time please don't hesitate to get in touch with us. Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.