DIY 1MM FAB MINITUB KITS- to suit VE-VF Sedan/Wagon/Ute
DIY 1MM FAB MINITUB KITS- to suit VE-VF Sedan/Wagon/Ute
DIY 1MM FAB MINITUB KITS- to suit VE-VF Sedan/Wagon/Ute

DIY 1MM FAB MINITUB KITS- to suit VE-VF Sedan/Wagon/Ute

Regular price$595.00
/
Tax included. Shipping calculated at checkout.

  • Sticker Kit Included

These Tubs allow an additional 30mm of clearance to allow a much wider tire!
They are also a symmetrical tub meaning the drivers side tub is equal in length to the passenger side tub. 

Included in the kit- 
2 x tub tops
2 x tub sides
1 x infill side panel 
 
Tubs are constructed from 1mm mild steel and are flat packed for transport. 
All that is needed to assemble is a hammer (but a dolly and a couple extra hands will be great help).

This is a DIY kit meaning the minitubs are supplied but will require you to mark and cut out the original wheel tubs and weld these in place. For a novice allow roughly 24-28 hours labour start to finish.


Please note-
Tubs will not work with a standard Sedan fuel tank as the drivers side tub delete's the void in which the fuel filler is routed.

Factory brake lines are routed around the chassis and have a bracket on the outside of the rail, this needs to have the spot welds drilled out and relocated to the underside of the chassis rail.

A custom width can be made up if need be, as well as custom bead rolling. It will increase turnaround time however.

Tub Kits should only be installed by qualified fabricators.

 

 

Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.


Recently viewed