V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option
V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option
V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option
V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option
V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option
V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option

Showtime Customs & Fabrication

V2 EXTREME LOCK KIT VT-VZ - Rack Spacers Option

Regular price $2,069.00
Unit price  per 

Our latest V2 Steering Lock Kit
This is the ultimate in Steering Angle and Performance!

The Kit consists of-

Lower Control Arm's
Front Caster Arm's
Front Caster Plate's
Modified Steering Knuckle's
Steering Rack Spacer's
Extended Tie Rods
Tie Rod Ends

If you select Changeover, you will need to send in your own knuckles

Ship to: Showtime Customs & Fabrication 2 Depot Road, Heathcote 3523 VIC 0432 020 733 Sales@showtimecustoms.com.au

We strongly suggest that you send in your parts to be modified!
With an increasing difficulty in sourcing them, we cannot confirm an ETA


Introducing the VT-VZ Stg3 V2 Kit! (Pontiac GTO '04-'06)
With a newly designed control arm/caster arm assembly this kit will allow clearance for the widest of wheels to be ran at 70+ degrees of lock without fowling on either the caster arm or the chassis rails!

Whilst we not only wanted to achieve the looks and finish of something that can stand above the rest we also wanted to offer a product that will work with our fabricated knuckles that will be released later this year that are anticipated to be capable of 0 degrees of Ackerman at 70 degrees of steering angle!

The kit does not come with sway bar links (which is ok to run no sway bar if you are running coilovers up front), OEM Style sway bar links or Double Heim sway links are available to purchase separately, these mount onto the Lower control arm as apposed to the factory setup where they mount to the strut.

This kit is optioned with the Offset Steering rack Spacers which move the position of the Tie rod mount forward, but as an upgrade we also offer a Modified subframe which moves the complete steering rack mounts forward in the subframe (as well as extending the lower half of the steering column to suit) Please message us about enquiries.
Ultimately the relocated steering rack option would be the preferred option due to increased strength and maintaining appropriate geometry within the steering,
however the majority of kits we sell are optioned for the offset rack spacers due to ease of install, price and due too running larger exhaust pipes (some 1-7/8 4into1 extractors) may not have the clearance to have there rack moved 25mm forward.

Fitted with Premium Teflon lined Chromoly Heim joints allows for great adjustment with absolutely zero flex within the complete front suspension!
The arms are approx. 50mm extended over the standard control arm length which will require pumping the guards if wanting to keep the tyre somewhat covered.
Unlike some other lock kits on the market we design our knuckles to still allow complete rack travel, helping with driveability and reducing un needed twitchiness!
The kit will work with standard struts.

 

 

Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!