STAGE 3 LOCK KIT VR-VS - Rack Spacer Option
STAGE 3 LOCK KIT VR-VS - Rack Spacer Option
STAGE 3 LOCK KIT VR-VS - Rack Spacer Option
STAGE 3 LOCK KIT VR-VS - Rack Spacer Option
STAGE 3 LOCK KIT VR-VS - Rack Spacer Option

Showtime Customs & Fabrication

STAGE 3 LOCK KIT VR-VS - Rack Spacer Option

Regular price $1,899.00
Unit price  per 

Stage 3 Big Angle Lock Kit VR-VS

Provided in the kit is: 
Modified Steering knuckles
Complete lower control arm/Caster arm assembly
Front caster mount plates
Offset rack spacers
And all Nuts/Bolts etc needed!

This is a big lock kit that replaces the factory lower control arm and caster arm assembly with a 1 piece chromoly arm design,
This allows for added strength, reduced weight but most of all alot of much needed clearance from big wheels and brakes at the newly achieved angle!
The design of the arm allows for adjustable caster, along with the added track width of 35mm increasing Stability and Camber!
This kit is achievable of over 65 degrees of lock and a very driveable and user friendly amount of ackerman, these knuckles are also used in the Stage 3 Vb-Vp Big Lock Kit.
Fitted with Premium Teflon lined Chromoly Heim joints allows great adjustment with absolutely zero flex within the complete front suspension! 
To run this kit you will need to remove the front sway bar completely, it is highly recommended to run front coilovers or struts with a firmer spring rate! (stock front struts with a king spring, pedders etc spring will work however)
This kit is designed to be bolt in with basic tools/drill, you will need to drill out the lower control arm mounting hole to 1/2"(13mm) from 12mm.
To allow the kit to work without steering bind we supply offset steering rack spacers which move the position of the tie rod mount forward, these are great for those on a budget but we also offer a Rack Relocate option that repositions the steering rack in the K-Frame which can be a little less prone to failure in any on track accidents. For this option please see link below:

Please Note-

Pictures are for illustrative purposes only and therefor are only a representation of what may be included in the kit, for a complete breakdown please email us at

Suspension arms are finished in a Neon Green powder coat (Pictures show them finished in a Gloss Black)

If wanting to run a sway bar or wanting a custom length LCA please don't hesitate to Email or Message us at the Facebook Page!




Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

Please Note- All orders are manufactured per order, please allow up to 6 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.