Showtime Customs & Fabrication
STAGE 2 LOCK KIT VTs2-VZ
The Stage 2 kit is a great 'bang for buck' setup, offering a widened track width increase camber and stability as well as easy handling lock!
If you select Changeover, you will need to send in your own knuckles, control arms, caster rods
Ship to: Showtime Customs & Fabrication 2 Depot Road, Heathcote 3523 VIC 0432 020 733 Sales@showtimecustoms.com.au
We strongly suggest that you send in your parts to be modified!
With an increasing difficulty in sourcing them, we cannot confirm an ETA
The Kit consist of –
Modified Drift Knuckles
Adjustable Control Arms ( 25mm Extended Max )
Tie Rods ( +50mm )
(Sway bar link pin setup- as an option)
The stage 2 kit is for those wanting a nice useable kit whilst staying within a limited budget, it offers an increased track width which increases stability and negative camber.
The drift knuckles also offer a good amount of steering angle over the stock knuckles.
If you are wanting to run the sway bar please select Yes in the option bar, as the factory sway links will bind on the strut under full lock.
The sway link is not something that can be added down the track as the tabs need to be welded to the arms.
Kit is to suit Series 2 VT right through to VZ.
Whilst the Series 1 VT runs a different ball joint setup and thread pitch on the tie rods, If you are wanting to run this in your Series 1 VT you will also need too purchase Vx-Vz tie rod ends.
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.