Showtime Customs & Fabrication
BRAIDED LINE KIT-DUAL CALIPER HYDRO HANDBRAKE - VB-VF
This is a braided brake line kit to go from the hydraulic handbrake down to each rear caliper.
To suit Vb,vc,vh,vk,vl,vn,vp,vr,vs live axle commodore (with disc brake rear) as well as Vt,vx,vy,vz IRS Commodores including the Ute/Wagon/Statesman/Monaro.
This listing is for-
3 x Braided Brake Lines
1 x Tee Piece
These braided brake line kits are a super easy way of installing a dual caliper hydraulic handbrake setup into your drift car!
Mount your Hydraulic Handbrake and dual calipers (Using our SCF Hydro mounts and Twin Caliper mounts make this super easy!) then run the braided line from the Hydro all the way down to each rear caliper and bolt up using the original banjo bolts from the calipers, secure the line along the body/diff (Irs arms on the vt vx vy vz) and then then bleed up the system!
All lines are constructed from 304 grade stainless and then insulated in a Neon Green PVC to keep protected and looking fresh and clean!
All lines are ADR/DOT approved.
If you have a vb vc vh vk vl vn vp vr or vs commodore and would like to keep cost's down, please see our listing for the Single Braided Line which retains the factory brake hard line on the diff and the 3 x rubber lines, running rubber lines can reduce the responsiveness and feedback that you get from running Braid all the way from the Hydraulic handbrake too the calipers but is a good way of keeping the setup as cheap as possible.
Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!
All products and components must be installed by a professional.
It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.
Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.
All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.
Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!
Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.