DIY 2.5MM SKID TUB KIT- to suit VN-VS UTE/WAGON
DIY 2.5MM SKID TUB KIT- to suit VN-VS UTE/WAGON

DIY 2.5MM SKID TUB KIT- to suit VN-VS UTE/WAGON

Regular price$645.00
/
Shipping calculated at checkout.

  • Sticker Kit Included
These are a DIY Minitub Kit to suit the VG,VR and VS UTES as well as the VN,VP,VR,VS WAGON. 
These minitubs bring the tub sidewall over to the edge of the chassis rail.
Being 3mm thick they are a great Minitub for anybody building a burnout or event style car where you will popping tyres!
Factory wheel tubs have a tendency to split from the seam, eventually tearing the wheel tub open so it's a great idea to replace the wheel tubs before this happens!


Included in the kit- 
2 x tub tops
2 x tub sides
1 x infill side panel 
1 x bottom infill panel
2 x rear skid plate


Tubs are constructed from 2.5mm mild steel, tub tops are pre rolled yet require welding to assemble. 

This is a DIY kit meaning the minitubs are supplied but will require you to mark and cut out the original wheel tubs and weld these in place. For a novice allow roughly 24-28 hours labour start to finish.

Please note-

These Minitub Kits will not allow the use of a standard fuel tank on the WAGON only, Ute is fine to use a standard tank.

We always suggest you have a qualified fabricator fit the product, if you would like a quote on having us fit the Minitubs please don't hesitate to Email us at Sales@showtimecustoms.com.au

Picture of red vehicle shows our 1mm fabricated tub in a Vt-Vz for the purpose of showing how it will fit. The 2.5mm tub kit does not include bead rolling. 

 

 

 

Use of ANY products or components designed, manufactured or sold by ‘Showtime Customs & Fabrication’ is done so at your own risk!

All products and components must be installed by a professional.

It is up the user to conduct regular maintenance checks and if there is a product or components to be found faulty or worn, to have it replaced before otherwise failure can occur.

Use of ANY products or components designed, manufactures or sold by ‘Showtime Customs & Fabrication’ leading to / resulting in any product damage, injury or death, Showtime customs & Fabrication is not liable or at fault.

All suspension, steering, brake etc products or components are to be specifically used in an ‘Off Road’ application for ‘Show’ purposes only.

Now all that aside, get out there, have some fun & be sure to tag our Instagram and Facebook page!

Please Note- All orders are manufactured per order, please allow up to 4 weeks for the order to be fulfilled before shipping.
If you have any queries on turn around time please don't hesitate to get in touch with us.
Do NOT place the order if you feel these wait times will not work in with your needs, we do not offer direct refunds due to each order being manufactured individually, only store credits will be offered.


Recently viewed